Skip to content
Caps & NecksCaps & Necks
    • part no. search
    • 0

      Cart

      No products in the cart.

    • Home
    • Caps
      • A Series – 2.28″ OD
      • C Series – 2.59″ OD
      • D Series – 4.31″ OD
      • F Series – 3.00″ OD
      • I Series – 1.78″ OD
      • J-Series Tethered Gas Caps
    • Necks
      • A Series – 2.28″ OD
      • C Series – 2.59″ OD
      • D Series – 4.31″ OD
      • F Series – 3.00″ OD
      • I Series – 1.78″ OD
      • J Series For Stant Threaded Caps
      • X Series For Kelch 2.25” Caps
    • Radiator
    • Gaskets
    • Quality
      • Quality Certs
    • Contact
    •   702-641-3500
    Home / Filler Caps / Filler Caps, J-Series

    CJ-5299-D

    Categories: Filler Caps, Filler Caps, J-Series
    Description

    Specifications:

    • Outside Diameter:
    • Inside Diameter:
    • Vented:
    • Finish:Zinc Plate
    • Gasket Material:
    • Gasket Part Number:
    • Stamping:No
    • Stamping Type:n/a
    • Chain:No
    • Chain Part Number:n/a
    • Padlock:No
    • Dipstick:No
    • Dipstick Length:n/a
    • Dipstick Part Number:n/a

    Notes:

    Designed to provide a positive pressure seal up to 24.5kPa with an allowable leak rate of no more than 10 cc/min. This cap does have a pressure relief valve and that valve will start to open between 24.5 kPa and 34.5 kPa and should be full open by around 40 kPa and flowing hundreds of lpm. This cap will allow make up air into the tank in a negative pressure situation. The vacuum valve is designed to open between -7 kPa and -10.5 kPa.

    Request A Quote
    Form is successfully submitted. Thank you!
    Request A Quote
     
    Powered by ARForms  (Unlicensed)
    • Home
    • About
    • Contact
    • Terms of Sale
    • Privacy Policy
    Copyright © 2020 ALL Rights Reserved. Developed By: Epik Solutions
    • Home
    • Caps
      • A Series – 2.28″ OD
      • C Series – 2.59″ OD
      • D Series – 4.31″ OD
      • F Series – 3.00″ OD
      • I Series – 1.78″ OD
      • J-Series Tethered Gas Caps
    • Necks
      • A Series – 2.28″ OD
      • C Series – 2.59″ OD
      • D Series – 4.31″ OD
      • F Series – 3.00″ OD
      • I Series – 1.78″ OD
      • J Series For Stant Threaded Caps
      • X Series For Kelch 2.25” Caps
    • Radiator
    • Gaskets
    • Quality
      • Quality Certs
    • Contact
    • Login
    •   702-641-3500

    Login

    Lost your password?